is it possible convert Z2100 24" to 44" ?

[rubensanchez01]

I have 6 broken Z3100, Z3200 44" printers collecting dusts .  all non functioning, due to printheads & inks problems.

Then I repair a 24" Z2100 easily & it prints as good as the 12 colors Z3100, Z3200.

It would be nice, if I could move all parts from Z2100 & assemble them on the body of 44" , is it possible ?
  ( main PCA board, Carriage box, formatter, service station, both ink stations  etc )   for sure need a new 44" inktube..

your suggestion would be greatly appreciated.

[rubensanchez01]

Spoiler

I google the Z2100 main pca board 44" which was same the main as the 44" Z3100... I do have 3 of them ..before I used the
Z3100 hardisk on Z2100 24" & it worked fine... after printer up & running, I updated the Z2100 24"
with its version firmware... all finished perfectly.

[rubensanchez01]

I google the Z2100 main pca board 44" which was same the main as the 44" Z3100... I do have 3 of them ..before I used the
Z3100 hardisk on Z2100 24" & it worked fine... after printer up & running, I updated the Z2100 24"
with its version firmware... all finished perfectly.