cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
fr13e
Level 1
2 1 1 0
Message 1 of 2
252
Flag Post

Solved!

not printing anything at all

HP Recommended
designjet t120
macOS 10.14 Mojave

Hi, the designjet T120 is not printing anything out even though the screen on the the designjet showing "printing".

I did remove the cable connecting between the desk top & designjet, power down & unplug, nothing seems to resolve the issue.

I did try to do form feeding, change paper source, load the roll, all these are working as usual but it is JUST NOT PRINTING OUT.

Please help. Thank you.

 

1 ACCEPTED SOLUTION

Accepted Solutions
fr13e
Author
Level 1
2 1 1 0
Message 2 of 2
Flag Post
HP Recommended

I did a "hard reset" but skipped the "align printhead" part. It was still the same. Not printing anything out even though the front panel showing "printing".

I powered it down for a very long time, turn it back on. The designjet prompted again the "align printhead" but this time I did not skip and let it perform the alignment.

After the alignment, it starts working. It's really print out as like the front panel showing "printing". I got the hard copy of the drawing.

Next time, perform all the steps when it prompt after the hard reset to save all these dramas from happening again.

Thanks guys. Problem solved.😀

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
fr13e
Author
Level 1
2 1 1 0
Message 2 of 2
Flag Post
HP Recommended

I did a "hard reset" but skipped the "align printhead" part. It was still the same. Not printing anything out even though the front panel showing "printing".

I powered it down for a very long time, turn it back on. The designjet prompted again the "align printhead" but this time I did not skip and let it perform the alignment.

After the alignment, it starts working. It's really print out as like the front panel showing "printing". I got the hard copy of the drawing.

Next time, perform all the steps when it prompt after the hard reset to save all these dramas from happening again.

Thanks guys. Problem solved.😀

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation