cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
MIGUELAPC
New member
5 3 0 0
Message 1 of 4
334
Flag Post

problema en cabezales

HP Recommended
Desingjet 5000 series

That such, thanks for your suggestions, the equipment already light well and does its course well, the insertion of paper also, only that at the time of recovering the heads reaches 99% and sends this error message, 0c0040 000000ef which already Consult the service manual, but do not give the full details, first of all make the recommendation of the manual but still the same.

3 REPLIES 3
davidzuts
Level 13
7,130 7,062 558 1,025
Message 2 of 4
Flag Post
HP Recommended

System Error: 0C0040
Problem
Description:
Error in Printhead Drop Detection. This error code appears when the
Printer detects that the same area of nozzles do not work in different
Printheads. The possible causes are either fibres or a piece of paper
in the Drop Detector or that the Scan-Axis reference is incorrect.

Was this reply helpful? Yes No
MIGUELAPC
Author
New member
5 3 0 0
Message 3 of 4
Flag Post
HP Recommended

Thanks problem solved

 

Was this reply helpful? Yes No
MIGUELAPC
Author
New member
5 3 0 0
Message 4 of 4
Flag Post
HP Recommended

Thanks problem solved

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation