cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
WSBHPUSER
New member
1 0 0 1
Message 1 of 2
696
Flag Post

" No link "on T520 network card yet the card has link lights flashing

HP Recommended
DesignJet T520 Printer

The printe is unable to be set up on the network. I believe this is a manufacture defect and Ive been on hold for suppport for over 30 min after bing transfered a bunch of times. Any way I have a T520 that displays no link in the network setup screen and is not getting ip address. Yet the network card has link lights flashing. I know my network is fine as I used a known good network connection from another printer i had. Any ideas?

 

 

1 REPLY 1
t_probets
New member
1 1 0 0
Message 2 of 2
Flag Post
HP Recommended

Did you manage to resolve this? i've got the same issue. Tried different cables and ports (even though i was confident there was no issue) still only displays 'no link'

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation