Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 2
Flag Post

reseat printer head problem

HP Recommended
Microsoft Windows 7 (64-bit)

 issue with our T2500 designjet where the machine is constantly asking to reseat the printhead after replace the printerhead and all cartridge also.

Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

You might try to use a syringe & draw out inks & see if any bubbles..

when you use the option to replace printhead & carriage box moved to left. shut off power, remove printhead,

insert syringe needle into the nozzle & draw out ink.. if you see bubbles,  those were the trouble maker. draw slowly
till ink solid color.


I have Z series printers & whenever I have problems with printheads, inks etc & always use it to

check the inks... all the time worked out good.

For reference only & not sure work or not for you..........

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation