cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
ronaq
Level 1
16 1 0 0
Message 1 of 4
492
Flag Post

vertical Line Shifting 0.5mm at the time of printing

HP Recommended
hp T2530 MFP

vertical Line Shifting 0.5mm at the time of printing

3 REPLIES 3
Mikeg81
Level 10
Level 10
2,276 2,235 113 242
Message 2 of 4
Flag Post
HP Recommended

Hi,

 

Increase the print quality to Normal or Best Quality

 

If you are priting on Fast, do this:

 

- Load the paper and match the paper selection to what is indicated on the paper box

- Do the Paper advance calibration and printhead alingment, in that order

 

If you still have the same problem, get the proper paper and do the scan axis calibration.

 

Best regards

Mike G

I'm an HP Inc employee. But my response is not in behalf of HP Inc
Was this reply helpful? Yes No
ronaq
Author
Level 1
16 1 0 0
Message 3 of 4
Flag Post
HP Recommended

normal quality or Best but customer not pay proper way

Was this reply helpful? Yes No
SHThompson
Level 12
3,729 3,640 305 673
Message 4 of 4
Flag Post
HP Recommended
I'm not quite sure what you're trying to say the problem is so a picture of the actual problem would be very helpful.

If my post resolves your issue please click the accepted as solution button under it.


To thank a Tech for a post click the thumbs up button under the post.


You can even click both buttons. . .
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation