cancel
Showing results for 
Search instead for 
Did you mean: 
mbeard0909
New member
3 2 0 0
Message 1 of 7
214
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

HP T100
Microsoft Windows 10 (64-bit)

Has anyone else experienced constant paper roll unload and  "rewinding""?  This happened randomly in the last week or two and today I can't get anything to print.  This T100 was a quick/cheap replacement for a longstanding T120 and is only a few months old.  I've tried 4 different rolls of paper thinking that may be an issue.  The multi-sheet tray is working fine, but every time I reload the 24" roll (successfully per dialog box)  it will cancel the job and rewind itself very fast after 10 or so seconds of printing.  I already have the latest drivers, etc.

 

Help....

6 REPLIES 6
Level 11
2,629 2,625 293 373
Message 2 of 7
193
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

How about printers internal pages how are they printed on the roll, and does it rewind after printing internal pages?

View my profile on LinkedIn
Reply
0 Kudos
mbeard0909
New member
3 2 0 0
Message 3 of 7
187
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

This also happens on internal prints on the roll too. 

Reply
0 Kudos
Level 11
2,629 2,625 293 373
Message 4 of 7
178
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

Any chance you are doing something wrong when loading media as a roll/single sheet?

 

If I understand good your printer starts to print on the roll and after 10 seconds of printing stops and cancels the job and rewinds paper both when printing from a computer and internal pages?

 

Restore printer to factory defaults, update firmware if there is a newer version available from hp.com

View my profile on LinkedIn
Reply
0 Kudos
mbeard0909
New member
3 2 0 0
Message 5 of 7
177
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

Have tried all these steps and I’m loading the paper as I’ve normally done plenty of times before. Ieve even tried 4 different new rolls of paper. I even removed the printer from my pc and reinstalled it again as a new setup. 

Reply
0 Kudos
Level 11
2,629 2,625 293 373
Message 6 of 7
175
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

Printing internal pages from the printers menu can help determine if there a printer related issue or computer related issue. If your printer internal pages aren't printer as the should there is nothing wrong with your computer/drivers.

View my profile on LinkedIn
Reply
0 Kudos
tjcaine
New member
1 1 0 0
Message 7 of 7
99
Flag Post
HP Recommended

DesignJet T100 keeps unloading paper roll

I'm having the same problem, except I just took the printer out of the box and I haven't been able to print anything from a roll. 

 

It prints two lines on a 24" roll, then it starts canceling the print and says the roll must be unloaded. 

 

Are you printing via a wireless connection? 

 

Any other thoughts on this out there? 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation