Designjet T520 24in won't Print D size

[briangoesindie]

Hi,

I am trying to use my office's DJ T520 to print an ANSI D size drawing. We bought this one a few months ago and it has been working great, but I have found an option we had at our old office in no longer there. I used to be able to rotate the print 90 degrees manually in the print settings. Because we have the 24in version of the printer, I have to print the drawing in portrait which means it needs to rotate the 90 degrees so it can fit. Is there a way to bring this setting in? Is it just a drivers issue? I've been working with our company's IT guy to try to figure this out. Thanks!

[Ask-Me · Accepted solution]

Please refer the 'Use Paper Economically' section at the following HP web link to use the desired job rotate option:

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03559791

Hope this helps!

[rasheddul]

Hi,

If not working through recommendation from Mike posted info. please check through also the link: Paper Size

I thnk this topics will help to you.


Thanks,
Rashed

I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click the "Thumbs Up" to say "Thank You"

[bcolefrn]

The links don't work to get to the HP page, it just goes to the support front page

[RWHoppe]

Try this:

https://support.hp.com/us-en/document/c03559791