cancel
Theseeker13 Student
Student
1 0 0 0
Message 1 of 3
143
Flag Post
HP Recommended

HP DESIGNJET T1300 fails initializing 79:04

I have recently come across this error.  It doesnt pass 20% initializing before the system error.  LED 1 & 2 are lit on the formatter board.  The error is 79:04.   Any advice would be appreciated, before I go through HP for the costly repair.  Thanks in advance 

Luke

2 REPLIES 2
Professor
Professor
1,784 1,585 154 286
Message 2 of 3
126
Flag Post
HP Recommended

HP DESIGNJET T1300 fails initializing 79:04

I would attempt to update the firmware before doing anything else on the machine. If firmware does not resolve, remove all supplies (cartridges and print heads), power cycle unit and insert supplies one at a time when prompted.

Find this information helpful? Please click Kudos or tag as solution. I am not an employee of HP but a current field service tech with 20+ years real world experience troubleshooting and fixing HP Imaging hardware.
Reply
0 Kudos
ProfesoLuc Tutor
Tutor
16 16 0 4
Message 3 of 3
95
Flag Post
HP Recommended

HP DESIGNJET T1300 fails initializing 79:04

 

 

hello 

I had this problem . 

I replaced the hdd 

and it worked 

 

https://www.ebay.co.uk/itm/283429883592

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation