cancel
Showing results for 
Search instead for 
Did you mean: 
PlanPrinter Student
Student
1 0 0 0
Message 1 of 3
356
Flag Post
HP Recommended

HP DesignJet T520 24" printer

Hp DesigneJet T520 24in. HPGL2
Microsoft Windows 10 (32-bit)

Printer starts printing, than stops and unwinds the roll. Stops and then says,  Error in roll unload: Roll cannot be automatically unloaded. Please rewind the roll manually in order to resolve the problem.  It does it everytime. I reset it and it just does it again. 

 

Help, very frustrating. 

2 REPLIES 2
Master's Graduate
Master's Graduate
639 618 34 75
Message 2 of 3
286
Flag Post
HP Recommended

HP DesignJet T520 24" printer

Hi,

 

PLease check spindle gear is broken or not and check also media rewinder gear. Sometimes that problem raise missmatch for loading paper spindle with rewinder gear for some gap.

 

If all are ok, please perform paper loading sensor from diagnosis mode.

 

 

Regards,

Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Reply
0 Kudos
Egitto Student
Student
1 1 0 0
Message 3 of 3
108
Flag Post
HP Recommended

HP DesignJet T520 24" printer

Hello,
we have the same issue from 4 months till now. (I think that the Service HP in Catania <Italy> not understand nothing).
So, with any paper size in manual mode all works fine. only in automatic mode isn't working.

I have done the OOP test and the sensor is fine.
Can you suggest something else?

Thank you in advance.

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation