cancel
Showing results for 
Search instead for 
Did you mean: 
apc671
New member
6 4 0 0
Message 1 of 6
424
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

Latex 370
Microsoft Windows 10 (64-bit)

We are having issues with the Light Cyan part of the Light Cyan/Light Magenta (LC/LM) print head going out shortly after installation.  Its as if no ink is flowing through.  There is no error messages.  If I install another LC/LM printhead it also starts to go out only on the Light Cyan side.  What could be the issue?  Could it be that there is no pressure in the ink system?

5 REPLIES 5
Highlighted
rasheddul
Level 7
634 618 34 76
Message 2 of 6
413
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

Please check the LC/LM cap for ink tube which is connected with Printhead...maybe there have leack or not tight which is others like one.. ...That's why there haven't ink pressure in the ink tube for this color..... Please replace or any how change the plastic rubber and try... ..Otherwise you need to replace whole ink tube.... 

 

IMG_20180914_080659.JPG

 

Before replace it, I you may perform ink leakage from diagnostic mode. 

 

 

I hope that info. will help to you.

 

Regards 

Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Reply
0 Kudos
apc671
New member
6 4 0 0
Message 3 of 6
394
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

Yes I did that and even put a very thin amount of super glue to hold the cap and rubber in place.  I put in a new print head and it is still banding like there is no ink going through.  Could the print heads be defective from factory?

Reply
0 Kudos
rasheddul
Level 7
634 618 34 76
Message 4 of 6
373
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

This is not issue from printheads.... If you want you may cross check for printhead and try with another printer.......

You need to use plastic glue for alternate. Otherwise need to replace the new cap or old good cap.
Regards/Rashed
https://www.linkedin.com/in/rasheddul
Reply
0 Kudos
apc671
New member
6 4 0 0
Message 5 of 6
281
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

Still not working.  All caps was repaced with new caps.  Tubes were bled.  Contacts were wiped from printhead and on printer.  Still the same issue after 8 brand new Light Cyan/Light Magenta print heads.  Only Light Cyan is not firing.  Light Magenta is still ok on all 8 brand new print heads.  This new machine is down for more than 3 months.

Reply
0 Kudos
rasheddul
Level 7
634 618 34 76
Message 6 of 6
268
Flag Post
HP Recommended

Only Light Cyan not printing on Light Cyan/Light Magenta Print Head For HP 370 Latex Wide Format

Just manually clear the bubbles in the ink tube through 💉 injection shuck it.... And clean the Printhead with warm water on the nozzle....then try again. . . Please carefully check here no leakage in the ink tube.....ink supply station to Printheads cap. .. 

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation