Plotter not printing PDF document

[Bryon312]

Not printing out. 

I send a print job to the plotter and windows says its completed. The print job is no longer in the print queue. At the plotter it says finishing print but nothing is printed and there are no error logs saying it didnt print.

I am trying to print a pdf document 

Steps tried. 

Replace print roll. 

Restarted printer (powered off 30 secs from wall power)

Removed drivers then reinstalled them.

Installed drivers on 3 different computers . 

   One computer can print the document the other 3 can not 2 new , 1 with the origional issue. 

Printed test page and it worked.

Any help would be appreciated. 

Thanks, 
Bryon

[rasheddul]

Hi,

Thanks for contacting with HP support Forum.

Please confirm your operating info. and retry again new driver from below link:

http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=11203546&swLangOid=8&swEnvOid=4062

As depans on windows based driver.

Are you connect through ethernet cable by IP assigning base, please check IP configuration and address and ethernet cable.

If all are ok, please ping from your PC/Laptop.

I hope that will solved if you have successfully completed new driver installation.

N.B: Sometime virus will make a problem for printing, you just check your PC/Laptop has virus free.

Regards,

Rashed

Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!