-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Re: Q5669-67070 high wedge for Z2100 ? Print quality issues
Create an account on the HP Community to personalize your profile and ask a question
08-20-2016 05:11 PM
Ive got a Z5200 on the bench and it is smearing the ink a litle at the very edge of the paper which is causing a banding effect. THe effect comes and goes
I came across this part Q5669-67070 and Q5669-67075
This is is a "PRS extra high wdge"
I cant find a what it does - but will it help sot out the problem or what will ?
What does it do ?
Thanks Peter
Solved! Go to Solution.
Accepted Solutions
08-21-2016 04:05 PM
Hi,
That is used to increase the hight on the carriage.
Is recommended when using very thick medias.
First Make sure the media u are using is supported by the printer
Then make sure the selected media match the paper used.
If, the thickness of the paper is your problem.
Also consider
- Delaminated printheads
- Service Station contaminating printheads
- Media curling up due to its natural curl. (Use a new roll if this is the case)
- Left spittoon contaminating printheads
- Drop detector ful of ink
Mike G
I'm an HP Inc employee. But my response is not in behalf of HP Inc
08-21-2016 04:05 PM
Hi,
That is used to increase the hight on the carriage.
Is recommended when using very thick medias.
First Make sure the media u are using is supported by the printer
Then make sure the selected media match the paper used.
If, the thickness of the paper is your problem.
Also consider
- Delaminated printheads
- Service Station contaminating printheads
- Media curling up due to its natural curl. (Use a new roll if this is the case)
- Left spittoon contaminating printheads
- Drop detector ful of ink
Mike G
I'm an HP Inc employee. But my response is not in behalf of HP Inc
Didn't find what you were looking for? Ask the community