cancel
Showing results for 
Search instead for 
Did you mean: 
Kenny924
New member
1 0 0 0
Message 1 of 2
121
Flag Post
HP Recommended

The roll 2 is screeching metal on metal noise. roll 1 is fine

hp designjet T2530
Microsoft Windows 10 (64-bit)

Plotter is completely operable just the squeal coming out of the roll2 feeder where as in comparison roll1 feeds without the squeal.

1 REPLY 1
Level 10
2,715 2,704 245 509
Message 2 of 2
93
Flag Post
HP Recommended

The roll 2 is screeching metal on metal noise. roll 1 is fine

I have seen cases where people slam the paper onto the spindle and break the holder, forcing it out of place which results in grinding sounds. Try swapping spindles if they are the same to see if the noise follows.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation