We need move position key the Polycom VVX 410

[Anonymous]

version 5.6.1.XX

Model Phone Polycom VVX 410

we need move position key

it is provisioning file

<feature.enhancedFeatureKeys="1"/>
<lineKey>
      <lineKey.reassignment lineKey.reassignment.enabled="0">Enable the feature</lineKey.reassignment>
     <ColumnsDisplayedOnPone up.numOfDisplayColumns="2">VVX5xx,6xx Only 1,2,3,4 are acceptable</ColumnsDisplayedOnPone>
   </lineKey>
   <linekey lineKey.1.category="line" lineKey.1.index="1"/>
   <linekey lineKey.2.category="line" lineKey.2.index="2"/>
   <linekey lineKey.3.category="speeddial" lineKey.3.index="3"/>
   <linekey lineKey.4.category="speeddial" lineKey.4.index="4"/>
   <linekey lineKey.5.category="speeddial" lineKey.5.index="5"/>
   <linekey lineKey.6.category="speeddial" lineKey.6.index="6"/>
   <linekey lineKey.7.category="blf" lineKey.7.index="0"/>
   <linekey lineKey.8.category="blf" lineKey.8.index="0"/>
   <linekey lineKey.9.category="blf" lineKey.9.index="0"/>
   <linekey lineKey.10.category="blf" lineKey.10.index="0"/>
   <linekey lineKey.11.category="blf" lineKey.11.index="0"/>
   <linekey lineKey.12.category="blf" lineKey.12.index="0"/>
</polycomConfig>
<attendant.behaviors>
<attendant.behaviors.display>
<attendant.behaviors.display.remoteCallerID attendant.behaviors.display.remoteCallerID.automata="0" attendant.behaviors.display.remoteCallerID.normal="0">
</attendant.behaviors.display.remoteCallerID>
<attendant.behaviors.display.spontaneousCallAppearances attendant.behaviors.display.spontaneousCallAppearances.automata="0" attendant.behaviors.display.spontaneousCallAppearances.normal="0">
</attendant.behaviors.display.spontaneousCallAppearances>
</attendant.behaviors.display>
</attendant.behaviors>
<attendant attendant.resourceList.7.address="101@XCV.net"
attendant.resourceList.7.label="Joshua"
attendant.resourceList.8.address="102@XCV.net"
attendant.resourceList.8.label="Ethan"
attendant.resourceList.9.address="103@XCV.net"
attendant.resourceList.9.label="Eric Wellman "
attendant.resourceList.10.address="104@XCV.net"
attendant.resourceList.10.label="Mathew"  
attendant.resourceList.11.address="105@XCV.net"
attendant.resourceList.11.label="Benc"
attendant.resourceList.12.address="109@XCV.net"
attendant.resourceList.12.label="Joshua"/>

[SteffenBaierUK]

Hello @Pluciano,

welcome to the Polycom Community.

Your configuration has the feature disabled:

<lineKey.reassignment lineKey.reassignment.enabled="0">

The community's VoIP FAQ contains this post here:

Jan 12, 2012 Question: Can I change / re-assign the appearance of  Line, BLF, Speed Dial and Presence Keys?

Resolution: Please check => here <=

I suggest you check the above.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

[Anonymous]

I apply changes

<lineKey.reassignment lineKey.reassignment.enabled="1">

but cannot see result, the key keep in the same place.