cancel
Showing results for 
Search instead for 
Did you mean: 
Drop_It_Hawt
New member
1 0 0 0
Message 1 of 2
227
Flag Post

BIOS NEEDED FOR HP SLIMLINE S5713W

HP Recommended
S5713W
Microsoft Windows 10 (64-bit)

Please help me find the updated bios for my little guy.

 

Thanks!


OS Manufacturer Microsoft Corporation
System Name LANCE-HP
System Manufacturer Hewlett-Packard
System Model s5713w
System Type x64-based PC
System SKU BV605AA#ABA
Processor AMD Athlon(tm) II X2 240 Processor, 2800 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 6.01, 9/29/2010
SMBIOS Version 2.5
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer PEGATRON CORPORATION
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.17134.285"
User Name Lance-HP\Lance
Time Zone Central Standard Time
Installed Physical Memory (RAM) 3.00 GB
Total Physical Memory 2.75 GB
Available Physical Memory 576 MB
Total Virtual Memory 4.42 GB
Available Virtual Memory 829 MB
Page File Space 1.67 GB
Page File C:\pagefile.sys
Kernel DMA Protection Off
Virtualization-based security Not enabled
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not InstantGo, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware Yes
Hyper-V - Data Execution Protection Yes

1 REPLY 1
TheOldMan
Level 15
Level 15
10,747 10,743 1,000 3,024
Message 2 of 2
Flag Post
HP Recommended

First thing -  that is an OLD PC and motherboard. Dec 2010  The support page indicates the motherboard is a M2N68-LA (Narra5) 

https://support.hp.com/us-en/document/c02642273

and the last BIOS file was v5.49.  I see from the posting you have v6.01 which is supposed to be a BIOS for the M2N68-LA Narra6.

If the PC is working, then leave it alone.  If you are asking for a BIOS update because it has failed, then I believe it is because that BIOS is for a different motherbaord than the one you have.

Please explain the reason for asking about an update. 

BTW: on an OEM model that old, there will not be any more updates.

 


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the thumbs up to give Kudos! " >.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation