Beeping and black screen

[KMatthews1]

My son updated my all in one computer, and now it beeps and I have a black screen.  X 3 cycles of beeps.  What does this mean please?

[Gaya1239]

Hi @KMatthews1,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Product details. Beeping and black screen Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• May I have the exact model name of the product? Refer to this document for steps to find the product details. Do not share any of your personal information such as serial, phone number, email ID, etc.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[KMatthews1]

Serial no 

SCC6310601

Model No. 24 - b010a

[Gaya1239]

Hi @KMatthews1,

Welcome to the HP Support Community

I understand you are facing an issue with your Beeping and black screen Blank screen on your HP Pavilion All-in-One - 24-b010a (Touch), The screen is not turning on Not to worry I will help you to get a resolution to resolve the issue.

May I know 

Do you see an HP Logo when you try to turn on the unit and then the screen goes blank or blue screen, If Blue screen Have observed any error message?

Please try the following Troubleshoots steps. 

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

After the above  troubleshooting steps if the unit  turns on 

please follow the troubleshooting steps-  HP PCs - The computer starts but the screen remains blank (Windows 11, 10)

click here and follow the troubleshooting steps- How to Fix a Black Screen on Your Computer

HP Notebook PCs - Computer beeps or a light blinks during startup

HP PCs - Computer does not boot or start

Please  update Windows and HP support assistances updates 

And update Bios and other drivers please click on the link. to update the drivers. 

follow this link to run the test hardware test 

Also, try updating the computer:

Step 1 Windows Updates - 

1) In the search box, type, and open Windows Updates. 

2) Check for updates. 

3) If the updates are available, click on Install and restart the computer. 

Step 2 HP Support Assistant Updates:

1) In the search box, type, and open HP Support Assistant. 

2) Check for updates. 

3) If the updates are available, click on Install and restart the computer. 

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!