cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Randy_Rhoads
New member
1 0 0 0
Message 1 of 2
252
Flag Post

Bios recover

HP Recommended
HP 24 All-in-One PC Model 24-f0025fur
Microsoft Windows 10 (64-bit)

Desktop PC: HP 24 All-in-One PC

Model: 24-f0025ur

[personal information removed]

System board ID:84DE

 

Hi there! I have a problem with BIOS update on my desktop (monoblock). Something happened when I tried to update BIOS via Windows official application. Now at each start, I have a message that the BIOS is corrupted and automatic recovery will starts (before that there was Error 503). I downloaded the BIOS from web-site (sp105999.exe) and according to instructions (usb drive formatted to fat32) prepared usb. Then starting with Win + B combinations recovery starts (HP BIOS Update) with the result "The system recovery is complete"  (however I am not sure that BIOS was recovered from the usb flash drive. Without an inserted USB drive it also recovers with the same result "The system recovery is complete"). After the following several quick reboots without any activity and finally, I again have a massage "the BIOS is corrupted ". I did this procedure several times with different USB ports. No solution was found. Can anyone help me? The computer can boot only until logo HP, then it reboots and gives 7-8 beep signals indicating that something goes wrong...IMG_20201212_121630.jpgIMG.jpg

 

1 REPLY 1
The_Fossette
HP Support Agent
HP Support Agent
29,155 21,825 1,963 2,169
Message 2 of 2
Flag Post
HP Recommended

@Randy_Rhoads

 

I reviewed your post and I understand that the computer is not booting to Windows after the BIOS update.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the steps in the steps in below article to perform a BIOS recovery and check if it helps.

 

https://support.hp.com/in-en/document/c02693833

 

If you continue facing the issue, then contact support and check the available service options for your computer.

 

Here is how you can get in touch with support.

 

1)Click on this link – www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

 

Let me know how it goes and you have a great day!

 

P.S: Welcome to the HP Support Community 😊

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

Stay Home – Stay Safe

The_Fossette
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation