Create an account on the HP Community to personalize your profile and ask a question
06-14-2020 07:18 AM
Product: HP Pavilion All-in-One - 23-q141in (Touch)
Operating System: Microsoft Windows 10 (64-bit)
HP Pavilion All-in-One - 23-q141in (Touch) Face the problem with pc booting issue, adopter light is blinking but bios beep sound not available. Also screen is blank,
Is related bios issue. Kindly help me, how to recover bios using key bord.
1 REPLY 1
06-17-2020 10:11 AM
Thank you for posting on the HP Support Community.
Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:
- Did this happen after a recent window or software update?
- Have you made any hardware/software changes?
- Did you make any changes to the settings of your PC prior to the issue?
- When was the last time it worked fine?
While you respond to that, let's try these steps:
To recover an earlier version of the BIOS on your computer:
Turn off the computer.
With the computer off, press and hold the Windows key and the B key at the same time.
Still pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen displays or you hear a beeping sound (usually 8 beeps).
NOTE: If the key presses do not work, press and release the Power button, and then immediately, press the Windows and B keys at the same time, repeatedly, until the computer beeps or opens the BIOS update screen.
The power LED light remains on, and the screen remains blank for about 40 seconds before anything displays on the monitor. You might also hear beeping sounds. Eventually, an HP BIOS Update screen displays and the BIOS update begins automatically.
If the HP BIOS Update screen displays proceed to the next step.
If the HP BIOS Update screen does not display, do one of the following depending on the condition:
Computer starts into Windows: The computer starts into Windows if the power button and keys are released too soon. Repeat the previous steps, holding the power button down for 2 or 3 seconds.
Power LED light turns off: The computer turns off if the power button is pressed and held down too long. Repeat the previous steps, holding the power button down for between 2 and 3 seconds.
After repeated attempts, the HP BIOS Update screen does not open: Your computer does not support this function or it has a hardware problem that is preventing the tool from opening.
Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
I am an HP Employee
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community