cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Joasia68
New member
1 0 0 0
Message 1 of 2
208
Flag Post

Doesnt boot up, just HP logo on screen

HP Recommended
Example: Pavilion 23

It's done this in the past, followed troubleshooting and all, but this time it's been about a week, not kicking in.

1 REPLY 1
praveenbv
HP Support Agent
HP Support Agent
7,672 7,670 336 429
Message 2 of 2
Flag Post
HP Recommended

Hi@Joasia68,Welcome to the HP Support Community!

 

We reviewed your post and I understand that the  All in one desktop is not Powering ON and stuck on the HP logo.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the below steps and check if it helps

 

Turn off the computer, press, and hold the Power button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

AND/OR - Power on your PC, press Esc (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).

AND/OR - Windows Logo key + Ctrl + Shift + B
(This key sequence actually restarts you graphics drive(W10 only).)

AND/OR - If you’re using multiple displays, try projecting video to a different monitor.
Press the Windows Logo key + P, select a display, and then press Enter.

 

 

https://support.hp.com/us-en/document/c02693833

Turn off the computer, and then connect the power cord.
Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
The HP BIOS Update screen displays and the recovery begins automatically. Follow any on-screen prompts to continue the startup to complete the recovery.
HP BIOS Update recovery in progress

If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next step to install a BIOS recovery file from the HP website.
If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the button for only 2 to 3 seconds.

 

Hope this helps! Keep me posted.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation