cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
185
Flag Post
HP Recommended

Fail to refresh BIOS with wireless KB/MS

HP ENVY 700-100 Desktop PC series
Microsoft Windows 10 (64-bit)

What I did and following Scenario:

  1. Hit key <Ctrl> + <F1> right after starting PC. See a black screen with lines white letters. The last line start with “BIOS “. But very short time, the screen became black. The PC idle.
  2. I pulled out the power cable. Plug in the power cable to PC. Restarted PC. Hit key <Ctrl> + <F1> right after starting PC. I headed several beeper sound. The PC idle.
  3. I opened the BOX pulled out the COMS control jumper. Put back it. Restart PC. The hard drive light tuned on about a few seconds second, then turned off, PC idle.
  4. I toke off battle for more than 60 seconds and put back. Restarted PC. The hard drive light tuned on about a few seconds second, then turned off, PC idle.
  5. I pulled out each memory bar (tow memory bars in mother board), turned on PC. The hard drive light tuned on about a few seconds second, then turned off, PC idle.
  6. I pulled all memory bars, turned on PC. The hard drive light tuned on about a few seconds second, then turned off, PC idle.
  7. Turn on PC, press <Esc> key constantly as HOP trouble shooting suggested. The hard drive light tuned on about a few seconds second, then turned off, PC idle.

 

1 REPLY 1
Highlighted
Retired
Retired
17,747 17,730 1,296 2,009
Message 2 of 2
156
Flag Post
HP Recommended

Fail to refresh BIOS with wireless KB/MS

Hi! @pomhmtahq, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!

 

I understand after updating the BIOS on your PC you have issues booting into your PC.

 

Don't worry I'll try to help you out.

 

Did you make any software or hardware changes on your PC?

 

As you mentioned after updating the BIOS on your PC you have issues booting into your PC.

 

Try few steps recommended below.

 

When you upgrade the BIOS on your PC, a copy of the previous BIOS version is stored in the HP_TOOLS partition of your hard drive. Many HP computers have an emergency BIOS recovery feature that allows you to recover and install the last known good version of the BIOS from the hard drive, as long as the hard drive remains functional. This emergency recovery feature is separate from the BIOS and is designed to work in the event of a catastrophic BIOS failure.
To recover an earlier version of the BIOS on your PC:
Turn off the computer.
With the computer off, press and hold the Windows logo key  and the B key at the same time.
Still pressing those keys, press and hold down the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen is displayed or until you hear a beeping sound (usually 8 beeps).
The power LED light remains on, and the screen remains blank for about 40 seconds before anything appears on the display. You might also hear beeping sounds. Eventually, an HP BIOS Update screen displays and the BIOS update begins automatically.
If the HP BIOS Update screen displays, proceed to step 4.
If the HP BIOS Update screen does not display, do one of the following depending on the condition:
Computer boots into Windows - The computer will boot into Windows if the power button and keys are released too soon. Repeat steps 1 through 4 above, holding the power button down for 2 or 3 seconds.
Power LED light turns off - The computer will turn off if the power button is pressed and held down too long. Repeat steps 1 through 4 above, holding the power button down for between 2 and 3 seconds.
After repeated attempts, the HP BIOS Update screen does not open - Your computer does not support this function or it has a hardware problem that is preventing the tool from opening. Contact HP using the Contact Supporttab at the top of this page.
After the BIOS is recovered, a Continue Startup button displays and a timer counts down. Click the Continue Startup button to restart the computer immediately. The computer will restart automatically when the timer reaches zero.
When the computer restarts, a black screen appears with a message similar to the following:
A system BIOS Recovery has occurred. 
BIOS Recovery (500) 
Enter - Continue Startup
Press the Enter key to continue immediately or allow the computer to reboot automatically.
   NOTE:
After restoring the BIOS, if the computer repeatedly displays a message about the BIOS, go to the HP Drivers and Downloads page and enter the model name of your computer. Select your computer model from the drop down menu and then select your operating system. Select BIOS to upload the latest version of the BIOS.
After restarting, Windows may display a message stating that the computer was improperly shut down or that a boot problem was detected. Read and respond to the screens to continue.

 

Refer this article to further troubleshoot BIOS issues.

 

 

If the solution provided worked for you, please mark accepted solution for this post.

 

Let me know if this helps!

Have a pleasant day ahead! 🙂

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

                                                                                                                  

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A4Apollo
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation