Create an account on the HP Community to personalize your profile and ask a question
06-26-2020 03:05 PM
Product: HP All In One model 27-r114
My HP All In One got stuck after performing updates and wouldn't boot up. After running System Diagnostics, I received the following error message "Couldn't get BuildID from BIOS string...'.
I created a recovery file but that did not to correct the problem.
I have gone thru many YouTube videos on what to try, but no luck.
Please help me so that I can continue to work from home. Nancy
1 REPLY 1
07-01-2020 04:41 PM
@NancyG2 Have you reset the computer to release excessive static? If not, use the below steps:
- Ensure your device is OFF.
- Unplug all the external devices (If any).
- Disconnect the power cord from the PSU,
- Press and hold the power button for about 30 seconds.
- Connect the power supply (power cord).
- Press the power button to turn on your desktop.
Meanwhile, here's what you need to do, to attempt a solution:
CLICK HERE FOR STEP BY STEP INSTRUCTIONS
(simply select your description of the issue from the bottom of the screen to gain access to the next set of steps that should resolve your concern).
FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: Click here
(By the end of this article all the issues should be resolved)
P.S: Welcome to HP Community!
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
I am an HP Employee
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community