cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
3 2 0 0
Message 1 of 6
151
Flag Post
HP Recommended

HP All in one Pavilion won't start up

HP Pavillion All in one PC
Microsoft Windows 10 (64-bit)

Power button one the back is lightend up, no problems with the wires, the button pressed in several times no results at all

Is this a known problem do i do something wrong ??

5 REPLIES 5
Highlighted
Level 12
7,506 7,474 314 669
Message 2 of 6
144
Flag Post
HP Recommended

HP All in one Pavilion won't start up


First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

AND/OR - Power on your PC, press Esc (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).

AND/OR - Windows Logo key + Ctrl + Shift + B
(This key sequence actually restarts you graphics drive(W10 only).)

AND/OR - If you’re using multiple displays, try projecting video to a different monitor.
Press the Windows Logo key + P, select a display, and then press Enter.


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Highlighted
New member
3 2 0 0
Message 3 of 6
136
Flag Post
HP Recommended

HP All in one Pavilion won't start up

Thanks but these solutions do not work.

I hear nothing at all when pressing the power button, also after the 15 seconds and repaet, there is nothing at all.........

0 Kudos
Highlighted
Level 12
7,506 7,474 314 669
Message 4 of 6
132
Flag Post
HP Recommended

HP All in one Pavilion won't start up

Hi

So apart from the stable light on the power on button, you have nothing else showing or working?

The ESC and F2 diagnostic test would not run after re-connecting the power cable?

 

 


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Highlighted
New member
3 2 0 0
Message 5 of 6
130
Flag Post
HP Recommended

HP All in one Pavilion won't start up

Thats right, the light at the back is on, the cable has been disconneted and put in again.

normaly you hear a sound that the device is starting up, no it is as dead as it can be.

 

Have read somewhere that the power button could bring problems, but i don not like to open the device myself.

 

thanks for the help by the way !!!!!

0 Kudos
Highlighted
Level 12
7,506 7,474 314 669
Message 6 of 6
128
Flag Post
HP Recommended

HP All in one Pavilion won't start up

Prego.


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation