02-03-2018 01:40 AM
Hi there, My All In One Desktop PC failed to bootup and i could relate to the issue as mentioned in the URL below. However after step #4, it continues to go in the loop and i get beep message during bootup. this just continues. Any assistance is greatly appreciated.
02-03-2018 05:23 PM
Thanks. But it doesn't help, the same situation as before. It takes few minutes to give that "beep" sound for 5-6 times and then BIOS upgrade message appears, i get BIOS recovery success message and computer restarts but not in normal mode. BIOS UPgrade and Recovery continues in loop mode.
Appreciate any suggestions please.
02-04-2018 04:04 AM
The timing is off.
POST takes a few seconds, hopefully, then moves on thru the BIOS to the HDD.
So several minutes?
Try without the HDD connected as sometimes a replacement/backup BIOS is stored there, let it boot from a DVD/USB instead.
So what BIOS is getting upgraded, to what new shiny number?
See mine has a SSID for the system board and a BIOS number to boot, arf arf.
What you got?