cancel
Showing results for 
Search instead for 
Did you mean: 
nwz
New member
1 0 0 0
Message 1 of 2
223
Flag Post

HP Elite 8200 - Can I skip pressing F1 when the bios detects errors?

HP Recommended
HP Elite 8200 sff PC
Microsoft Windows 10 (64-bit)

Hello!

I have a HP Elite 8200 sff PC (i5-2400, 8GB DDR3, 500GB, DVD-RW).

I replaced the computer case and the psu, to the psu i used a cable converter.

The pc is working fine, but at the boot i need to press the F1 key, because an error:

921-Front usb 1 / 922-Front usb 2 / 512-rear chassic fan not connected

This is completely normal, in the new case i don't use these.

In the bios i set „post messages” to disable and „bypass f1 prompt on configuration changes” to disable, too, but i need to press the f1.

Any solution to boot the pc normal, without pressing the f1?

 

Thanks,

nwz

1 REPLY 1
WAWood
Level 16
Level 16
30,583 30,490 2,787 6,735
Message 2 of 2
Flag Post
HP Recommended

@nwz 

Sorry but if the BIOS setting does not prevent the notifications then you are stuck as POST is going to keep checking for those devices indefinitely.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation