cancel
Showing results for 
Search instead for 
Did you mean: 
Chockner
New member
1 0 0 0
Message 1 of 2
219
Flag Post

HP Envy 700-010

HP Recommended
HP Envy 700-010
Microsoft Windows 10 (64-bit)

My HP Envy 700-010 will not boot up. All I get is the HP Logo and Please wait message

 

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,554
Message 2 of 2
Flag Post
HP Recommended

@Chockner, Welcome to HP Support Community!

 

Here's what you need to know and do, to resolve this issue:

 

Step 1: Remove discs and devices

Before troubleshooting startup issues, remove or disconnect all discs and devices from the computer.

  1. Turn off the computer.

  2. Remove any discs and USB devices.

  3. Remove memory cards from the card reader slot.

  4. Disconnect all non-essential devices such as printers, scanners, external hard drives.

  5. Leave only the mouse, keyboard, and monitor connected.

After you have removed all discs and devices, turn on the computer.

  • If the computer starts, reconnect devices one at a time, to determine which disc or device is causing the problem. If the issue is solved, troubleshooting is complete.

  • If the computer still does not start and exhibits the same problem, press and hold the Power button to turn off the computer. Do not connect anything, and then continue troubleshooting.

Step 2: Perform a hard reset

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a Hard Reset.

After you have completed these steps, if the computer startup issue is resolved, go to HP PCs - Updating Drivers and Software with Windows Update (Windows 10, 8, 7), and then go to HP PCs - Using HP Support Assistant (Windows) to update all device drivers.

 

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2 ONWARD

(By the end of this article all the issues should be resolved)

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation