cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
2 1 0 0
Message 1 of 4
593
Flag Post
HP Recommended

HP Envy 750-414 (Graphics Card Install)

HP Envy 750-414
Microsoft Windows 10 (64-bit)

Hey guys I'm trying to install a NVIDIA GeForce GT730 graphics card into this desktop.  For some reason no matter what I do once installed my monitor merely goes to sleep and doesn't show any type of screen whatsoever.  I have tried connecting the monitor via VGA and HDMI with no results.  I tried disabling the integrated graphics without any luck.  I have tried all kinds of routines without any success.  I would hate to return this video card so I'm hoping someone can help me.  HELP!!!

3 REPLIES 3
Highlighted
Level 12
Level 12
6,006 5,992 565 1,264
Message 2 of 4
565
Flag Post
HP Recommended

HP Envy 750-414 (Graphics Card Install)

Hi LJS199330,

 

Welcome to the forum.

 

I don't work for HP.

 

The 730, as well as 900 series and 1000 series Nvidia graphics cards, will work with your PC.

 

You have to go to the BIOS.

 

Check the Security tab. Look at Device Security. Hey, I'm jogging my memory. The settings you need to change are located somewhere in Device Security settings.

 

Disable Secure boot and then enable Legacy boot.

 

Save changes. Exit the BIOS.

 

Then confirm using a four digit code supplied at system reboot.

 

You should now be able to install the 730 after doing the above.

 

Please uninstall the current graphics drivers before using the above steps.

 

Regards

0 Kudos
Highlighted
New member
2 1 0 0
Message 3 of 4
532
Flag Post
HP Recommended

HP Envy 750-414 (Graphics Card Install)

I enabled Legacy Boot however I did not get a four digit code upon reboot.  What did I do incorrectly?

 

0 Kudos
Highlighted
Level 12
Level 12
6,006 5,992 565 1,264
Message 4 of 4
525
Flag Post
HP Recommended

HP Envy 750-414 (Graphics Card Install)

Hi

 

You have to disable Secure boot first. Then enable Legacy boot.

 

Now, save changes and exit the BIOS.

 

Your PC wil reboot.

 

Wait for the prompt to confirm the changes. You should receive a four digit numeric code to confirm the change.

 

I have done this on many HP PCs.

 

It works.

 

The PC will not see the new graphics card if you don't do this.

 

Regards.

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation