-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- Re: HP d530 SFF (DG060A)
Create an account on the HP Community to personalize your profile and ask a question
03-19-2017 10:07 PM
Good day! How this trouble will be to fix?
Solved! Go to Solution.
Accepted Solutions
03-20-2017 06:37 AM - edited 03-20-2017 06:37 AM
Hi:
What processor did you install? Please provide the full description.
Most likely it was an unsupported processor that you installed.
The d530 can only take pentium 4 processors with the 512KB L2 cache.
If you know you installed a supported processor, then you have to run the Microcode update found on the support page.
You can only run the microcode update by using a floppy disk. There is no other way to do it.
03-20-2017 06:37 AM - edited 03-20-2017 06:37 AM
Hi:
What processor did you install? Please provide the full description.
Most likely it was an unsupported processor that you installed.
The d530 can only take pentium 4 processors with the 512KB L2 cache.
If you know you installed a supported processor, then you have to run the Microcode update found on the support page.
You can only run the microcode update by using a floppy disk. There is no other way to do it.
03-20-2017 11:10 AM
Good afternoon!
Intel Pentium 4 Prescott processor 3.00 HZ L2 cache L2 1024 KB
Maybe it is not compatible with this motherboard, but it works perfectly and the only one problem is a drop-down window with a problem that is solved by pressing F1.
I thought that there was some kind of firmware for this mother who would solve this problem
Thanks for the link to the firmware!
I'll try to install it, maybe this will help.
03-20-2017 01:53 PM
You're very welcome.
You can try to run that microcode update, but I do not think it will fix the problem.
The PC is only designed to run processors with the 512 KB L2 Cache (Northwood).
Other processors may work, but you will always get the microcode error.
This is the best processor you can install in that PC without getting any microcode errors.
Didn't find what you were looking for? Ask the community