cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
1 0 0 0
Message 1 of 2
93
Flag Post
HP Recommended

Hard drive short DST check failed, what does this mean, how do I fix it or next steps please?

HP Pavilion 500 PC series
Microsoft Windows 10 (32-bit)

Error message displayed after running HP PC heardware diagnostics UEFI - GLPC0J-75L9KL-X87R61-60Q303, prod ID F6J99A#ABU.

 

Do I need to purchase a new hard drive, if so how do I do this if its running to slow to start back up of this HD?

 

thank you in advance of support and resolution 

1 REPLY 1
Highlighted
Level 20
Level 20
117,272 107,453 17,022 26,066
Message 2 of 2
77
Flag Post
HP Recommended

Hard drive short DST check failed, what does this mean, how do I fix it or next steps please?

Hi:

 

The error code reported, Hard Disk 1 Quick Test Failure, means the hard drive needs to be replaced and the operating system reinstalled.

 

It is highly unlikely you will be able to recover any data from it.

 

You could, after you replace the drive, purchase a 3.5" hard drive enclosure, and see if you can plug it in to a working PC's USB port and read the drive.  Then you may be able to copy any files you want to save off the drive.

 

Again...don't get your hopes up.

 

https://www.amazon.com/AmazonBasics-3-5-inches-SATA-Drive-Enclosure/dp/B01MZC303G/ref=asc_df_B01MZC3...

 

Unfortunately, I can't find a service manual for your model for how to open it up to replace the drive.

 

After you replace the hard drive, you can reinstall W10 for free as follows...

 

You can make a W10 USB flash drive installer with the Microsoft Media Creation Tool, using an 8 GB flash drive using another Windows PC, if your PC is not working.

 

https://www.microsoft.com/en-us/software-download/windows10

 

If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.

 

Here are the steps to create the W10 USB flash drive installer...

 

Select Download tool now, and select Run.If you agree to the license terms, select Accept.

 

On the What do you want to do? page, select Create installation media for another PC, and then select Next.

 

Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. You want 64 bit.

Select which media you want to use:

 

USB flash drive. Plug in a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.

 

Then you can reinstall the drivers and available software from the PC's support page.

 

https://support.hp.com/gb-en/drivers/selfservice/HP-Pavilion-500-Desktop-PC-series/5399647/model/677...

 

 

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation