Showing results for 
Search instead for 
Did you mean: 
New member
4 1 0 0
Message 1 of 2
Flag Post


How to accomplish Network Boot for HP Z240 Tower Workstation

HP Recommended
HP Z240 Tower Workstation
Microsoft Windows 7 (64-bit)
I got one .gho file. I want to clone the gho to the other 20 HP Z240 Tower Workstations (let 's call them clients) I have set up a dhcp and tftp server for transferring that .gho. I powered on a client. Then pressed Esc and select Network Bootup. The client display message as follows: === Client IP Mask: DHCP: PXE Menu Boot File v1.10 Transferring image file.... === Then the client keeps hanging at this message, as if it is not able to accept the image file. Why did this happen ? -- PS : I used the same dhcp-tftp server cloned another .gho to more than 30 Dell clients, the screen got into the ghost process-bar within 20s. So what should I do to solve the hanging problem with Z240 Tower Workstation -- Any suggestion would be appreciated.
Level 12
7,692 7,654 332 702
Message 2 of 2
Flag Post
HP Recommended


The boot sequence wants PXE first in the queue I believe.


0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation