cancel
Showing results for 
Search instead for 
Did you mean: 
ET_phone_home1
New member
2 1 0 0
Message 1 of 4
220
Flag Post
HP Recommended

I get "ME FM Update Failed, please try again!" followed by "Error sending End of Post message to ME:

Example: Pavilion 27-a100 ALL-IN-ONE DESKTOP
Microsoft Windows 10 (64-bit)

I get "ME FM Update Failed, please try again!" followed by "Error sending End of Post message to ME: HECI disabled, proceeding with boot!". I tried Windows + B at startup and reset the BIOS, but I still get the message on booting up.

3 REPLIES 3
HP Support Agent
HP Support Agent
22,472 22,429 1,882 2,999
Message 2 of 4
147
Flag Post
HP Recommended

I get "ME FM Update Failed, please try again!" followed by "Error sending End of Post message to ME:

@ET_phone_home1 Welcome to HP Community!

Let's perform a power reset as per HP standards:

 

Ensure your device is OFF.

Unplug all the external devices (If any).

Disconnect the power from the computer

Press and hold the power button for about 30 seconds.

Connect the power supply

Press the power button to turn on your device and check if the issue persists.

 

If the issue persists, after the above steps, try the below:

To recover an earlier version of the BIOS on your computer:

  1. Turn off the computer.

  2. With the computer off, press and hold the Windows key and the B key at the same time.

  3. Still pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

    NOTE: 

    If the key presses do not work, press and release the Power button, and then immediately, press the Windows and B keys at the same time, repeatedly, until the computer beeps or opens the BIOS update screen.

    The power LED light remains on, and the screen remains blank for about 40 seconds before anything displays on the monitor. You might also hear beeping sounds. Eventually, an HP BIOS Update screen displays and the BIOS update begins automatically.

    HP BIOS Update screen showing a progress indicator

    • If the HP BIOS Update screen displays proceed to the next step.

    • If the HP BIOS Update screen does not display, do one of the following depending on the condition:

    • Computer starts into Windows: The computer starts into Windows if the power button and keys are released too soon. Repeat the previous steps, holding the power button down for 2 or 3 seconds.

    • Power LED light turns off: The computer turns off if the power button is pressed and held down too long. Repeat the previous steps, holding the power button down for between 2 and 3 seconds.

    • After repeated attempts, the HP BIOS Update screen does not open: Your computer does not support this function or it has a hardware problem that is preventing the tool from opening.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 4 ONWARD

(By the end of this article all the issues should be resolved)

 

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
ET_phone_home1
New member
2 1 0 0
Message 3 of 4
122
Flag Post
HP Recommended

I get "ME FM Update Failed, please try again!" followed by "Error sending End of Post message to ME:

Riddle_Decipher, thank you for your efforts, but it appears that you did not read my initial message. I have ALREADY tried the solution that you proposed. In fact, I have done that 5 times already and this message still appears on booting up. 

Do you have any other suggestions?

Thank you,

Greg

Reply
0 Kudos
HP Support Agent
HP Support Agent
22,472 22,429 1,882 2,999
Message 4 of 4
94
Flag Post
HP Recommended

I get "ME FM Update Failed, please try again!" followed by "Error sending End of Post message to ME:

ET_phone_home1 I needed to confirm if those were the exact steps you were referring to, that said, If you've done all of those steps multiple times and yet the issue persists, I'm afraid this is a hardware malfunction and the bios requires flashing at the repair center, and I suggest you talk to HP support and discuss your options, follow the below steps to get started:

 

1) Click on this link - http://www.hp.com/contacthp/

2) Click on Sign-in or select the product using the below step:

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Click on "Show Options".

Fill the web-form, to populate a case number and phone number for yourself!

 

Also, if you are having trouble navigating through the above options, it's most likely because the device is out of warranty, if yes? please send me a private message with the region you are contacting us from, 

here's how private messages work: Click here for details.

 

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation