cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 1
3 2 0 0
Message 1 of 3
221
Flag Post

I may have bricked my bios

HP Recommended
HP 6300 Pro Sff
Microsoft Windows 10 (64-bit)

I previously made some changes in the bios and after saving and exiting I got a black screen and couldn't get passed it so I shut the computer off and got a black screen with a long b loud beep so I turned off the computer then got a pending change is taking place but no matter which of the 3 I choose I continue to get black screen and a long loud beep.

 

Changes I made in the bios

 

Disabled runtime and sata power management

Disabled Amt

 

Is there something that can be done to fix the problem?

2 REPLIES 2
Level 12
7,691 7,654 326 686
Message 2 of 3
Flag Post
HP Recommended

Hi
Hopefully one of these documents will cover (and solve) your problem...

https://support.hp.com/ca-en/document/c00042629

https://support.hp.com/us-en/document/c02693833

Turn off the computer, and then connect the power cord.
Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
The HP BIOS Update screen displays and the recovery begins automatically. Follow any on-screen prompts to continue the startup to complete the recovery.
HP BIOS Update recovery in progress

If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next step to install a BIOS recovery file from the HP website.
If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the button for only 2 to 3 seconds.


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Highlighted
Author
Level 1
3 2 0 0
Message 3 of 3
Flag Post
HP Recommended

Thank you for your input. I tried the steps you mentioned but it seems like the HP 6300 pro Sff doesn't support the options

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation