cancel
Showing results for 
Search instead for 
Did you mean: 
Bonewars
New member
2 1 0 0
Message 1 of 3
566
Flag Post

IPXS8-DM won't boot

HP Recommended
CQ2960EA
Microsoft Windows 10 (64-bit)

Hi and thanks for the forum. I have a IPXS8-DM which will not boot. I've tried two different i3's and differnt ram.

 

The board powers up the fans for a few seconds and then shuts straight down again. It does this in a loop. This seems to be an issue, according to Google searchs ?

 

Many thanks in advance. 

2 REPLIES 2
mdklassen
Level 12
11,043 11,017 577 1,689
Message 2 of 3
Flag Post
HP Recommended

> I've tried two different i3's and different ram.

 

Have you tried a different power-supply?

 

> The board powers up the fans for a few seconds and then shuts straight down again. It does this in a loop.

 

Power-off. Disconnect the disk-drive. Power-on.  Does it stll "loop"?

If it does not, then the copy of the Windows on the disk-drive is corrupted, and is the source of the symptoms.

 

> This seems to be an issue, according to Google searches ?

 

Can one ever do a Google-search and NOT find any results?

Google simply has too much in its database.

You need to separate the wheat from the chaff.

 

0 Kudos
Bonewars
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

I purchased a brand new HP PSU as the PC didn't come with one. I will try another one that is at my partners powering a laptop. However, I did try the new PSU on her laptop and it appeared to be okay. Thanks for your advice. 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation