cancel
Showing results for 
Search instead for 
Did you mean: 
DomMarsala
New member
2 1 0 0
Message 1 of 3
173
Flag Post

My HP M01-f0027na has a bios update error and now displays nothing on screen.

HP Recommended
HP M01-F0027NA
Microsoft Windows 10 (64-bit)

Hi Everyone. I own a HP M01-F0027NA that restarted to install a bios update. It said update failed and now no screen.

before you post the exact same stuff from this forum: Black screen after failed bios update - HP Support Community - 6575489.  

I have tried recovery bios flash drives and the bios backup from hdd. Nothing at all. 

 

Anything apprieciated!!

Thanks,

Dom

2 REPLIES 2
Grzwacz
Level 12
Level 12
6,740 6,724 634 1,516
Message 2 of 3
Flag Post
HP Recommended

Hi,

 

Avoid HPSA updates in the future.

 

This HP site (Link) has the official steps to recover a bad HPSA BIOS update.

 

You will need HP factory service (reprogram the BIOS or replace the MB) if the above site suggestions don't work.

 

Regards

Reply
0 Kudos
DomMarsala
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Since that didn't work what do i do now then? I will mention is that the update failed at about 5%. My warranty disclaims that the warranty is only for hardware and that they cant fix it without a charge since there is no hardware fault. But is there a hardware fault that they can look at with warranty??

Thanks,

Dom

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation