Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

My HP Omni 27 won't turn the power on

HP Recommended
hp omni 27
Microsoft Windows 7 (64-bit)

my pc was installing an update but it later said cant update, reversing update. its fan was running at very high  speed and the PC shut down afterwards. The power light on the adaptor turns off when plugged to power.  PC power light flashes and turns off at the same time with light on the adaptor when plug to power. I have openned and pull all attached devices to motherboard to isolate problem but still the motherboard wont turn on. Any help here will be appreciated.

HP Support Agent
HP Support Agent
14,452 14,454 1,432 1,712
Message 2 of 2
Flag Post
HP Recommended


Welcome to the HP Support Community. This is a great place to get support, find answers and tips to your technical queries. I have reviewed your post and I understand, the computer is not powering on.

Appreciate you trying the steps. Don't worry, I'm here to help! 


Let's try these steps -


Step 1 Hard Reset -


1) Shutdown the computer. 
2) Unplug all the Adapter and peripherals connected. 
3) Press and hold down the power button for 15 to 20 seconds. 
4) Plug-in the Adapter. 
5) Try to turn on the computer. 


Step 2 BIOS Restore -


1) Shutdown the computer. 
2) Hold down the Windows and B button together while the computer is still turned off. 
3) Turn on the computer and continue to hold the Windows and B button until a BIOS Recovery screen appears. 
4) Follow on-screen instructions and click on OK.


If the computer still does not power on, this would confirm a hardware issue. I have sent you a Private Message with the details about the service options.
Check next to your profile Name, you should see a little blue envelope, please click on it. Click here for more details on how to access the private messages on HP Forums.

Hope this helps!


Let me know how that goes.


To thank us for our efforts to help you, click here to access your public post and Select - "Accept as solution" and click on the  "Thumbs up". 


Have a great day ahead 🙂

I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation