cancel
Showing results for 
Search instead for 
Did you mean: 
Simo_00
New member
2 0 0 0
Message 1 of 1
169
Flag Post

No post only black screen

HP Recommended

I have a hp z400 workstation that turn on but gives me a black screen with no beeps, i tried to remove all rams but still no beeps but when i did removed the cpu it gives me 3 beeps that means no cpu installed.i did replace the cpu with other one but still have the same issue. So i suspect the psu or the mobo.
Btw i did replace the psu with a non compatible one and it gives 4 beeps that means a power failure.

I tried 3 different gpus but still the same.
So the mobo detect a bad psu and detect no cpu installed but why she didn't gives beeps when RAM is not installed.
So is it a bad mobo or a bad psu.
Sorry for my bad english and plz help me to solve this problem.
Specs 
HP z400
6gb of ram
475 watt psu
Quadro 2000
Xeon w3565

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation