No screen on startup; 3 long beeps 2 short beeps

[Phaneron]

Recently, I got myself a new set of RAM sticks that I wanted to install.  After switching out the original pair of RAM I turned on my PC only for it to start beeping 3 long beeps followed by 2 short beeps.  My computer is properly connected to the monitor, but nothing appears.  After opening it, I realized that one of the RAM sticks wasn't inserted and locked properly.  I fixed the problem and tried to start it up agian only to have the same result.  I even tried getting completely newer RAM sticks to replace the ones I just bought just in case I somehow messed up the previous ones, but I still get the same thing happen.  It continuously beeps in this pattern for a few cycles until its just the LED power light flashing in a similar pattern.  From what I can understand, the beeping might allude to the problem being with the RAM placement, but I've made sure that I placed the ram correctly.  It's driving me nuts, man.  Any help?

[Lil_Boy_Blue]

Hi

You get a LONG (MAJOR) signal category, RED LED &

then a SHORT (MINOR) signal category, WHITE LED.

Major – the category of the error; Minor – specific error in that category

The AUDIBLE repeats 5 times, and the VISUAL until power is removed.

Hardware

3.2

The embedded controller has timed out waiting for BIOS to return from memory initialization. Indicates potential memory failure.

1 Reseat memory. 2 Correct memory configuration. 3 Test with known good memory. 4 Replace affected component.

[Phaneron]

Thanks for answering!  Unfortunately, I've reseated the memory sticks with new and working ones, yet it is still making that sound.