cancel
Showing results for 
Search instead for 
Did you mean: 
Cory30189
New member
2 0 0 0
Message 1 of 1
152
Flag Post

Screen blank and single beep after bios battery change

HP Recommended
hp compaq 6000 pro all in one
Microsoft Windows 10 (64-bit)

I replaced the cios battery and put everything back together and I can't get the PC the boot up. It Powers up but the screen is blank and I get a single beep and that's it nothing happens. The power led on the front is green. I've tried taking each memory module out 1 at a time and starting it and the same thing happens. I've tried putting each memory module in each slot and still the same thing. I've tried using some canned air and blowing everything clean and checking all connections but nothing. I'm stumped

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation