Stuck on press ESC for startup menu

[riza0406]

I had made a post about not being able to reset my PC due to bsod but I managed to reset it to factory settings. When it turns on at the bottom it will say "press ESC for startup menu"... and my screen blinks on and off. 

[Riddle_Decipher]

@riza0406 This could be a hard drive failure, to confirm I suggest we perform a hardware test using the below steps:

Install the latest version of the HP Hardware diagnostics (UEFI) on your device using this link: Click here for details

• Hold the power button for at least five seconds to turn off the computer.
• Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
• On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.
• Click Extensive Test.
• Click Run once, or Loop until error.
• While the test is running, the time remaining and test result for each component display on the screen.

If a component fails a test, write down the failure ID (24-digit code) for when you respond back to us.

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!