-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- Re: bios password for HP 675852-001 MS-7778
Create an account on the HP Community to personalize your profile and ask a question
10-02-2016 03:38 PM
i'm locked out of the bios and the clr cmos and the clr pwd headers don't remove the password they just put a factory password on and i don't know what this password is, i've also tried removing the bios battery twice once for 30min and again overnight but i'm still asked for a password does anyone know the bios passwords this motherboard will use.
motherboard: http://support.hp.com/za-en/product/HP-Pavilion-p7-1455-Desktop-PC-series/5295962/model/5297088/docu...
Solved! Go to Solution.
Accepted Solutions
10-02-2016 03:58 PM - edited 10-02-2016 03:59 PM
Hi:
The reason the clr pswd didn't work is because the instructions as you see them are incomplete/incorrect.
I have re-written them below, and that should take care of the problem...
- Turn OFF the computer and unplug the power cord.
- Move the jumper to from pins 1-2 (default) to pins 2-3
- Plug in and turn on the computer. The BIOS password should now be cleared
- Turn OFF the computer and unplug the power cord
- Then move the jumper back to default
- Plug the power cord and turn ON the computer
10-02-2016 03:58 PM - edited 10-02-2016 03:59 PM
Hi:
The reason the clr pswd didn't work is because the instructions as you see them are incomplete/incorrect.
I have re-written them below, and that should take care of the problem...
- Turn OFF the computer and unplug the power cord.
- Move the jumper to from pins 1-2 (default) to pins 2-3
- Plug in and turn on the computer. The BIOS password should now be cleared
- Turn OFF the computer and unplug the power cord
- Then move the jumper back to default
- Plug the power cord and turn ON the computer
10-02-2016 04:54 PM
You're very welcome.
I wouldn't feel that way.
You followed the manufacturer's instructions, and they were wrong.
I few weeks ago, I reported the problem to HP, who is supposed to be revising the instructions for that motherboard and a couple of others.
Didn't find what you were looking for? Ask the community