03-18-2011 07:18 AM
Hi all, i'm really hoping someone could shine a light on this one for me because I am totally stummped now!
I have a dx5150 (MS-7050 mobo) and it will not boot; upon powering it on you get 5 long beeps (fromt red led flashes in time), then a pause, then it repeats. Oh yeah, you also get no output to the monitor either.
I have tired booting with:
Only a keyboard and monitor attached
Only one stick of RAM (then alternating each one; there are 3 installed)
No RAM installed
The HDD disconnected
The DVD drive disconnected
Removed the CMOS battery; tried booting with and without it, as well as a known working one
All internal cards removed
All internal fans disconnected (even briefly with the CPU fan disconnected)
A different PSU installed
Oh yeah, and a mixture of all the above obviously!
The only 2 things left that I can think of are; either the CPU is fried (although I didn't think you get POST beeps for the CUP?), or there is a serios issue with the mobo.
Any further ideas would be greatly appreciated!
03-18-2011 07:49 AM
When you removed the CMOS battery did you have the jumper in the CMOSCLR position and press the power button to drain the current from the BIOS chip?
You should try the clear cmos again and leave it that way overnight.
When you press the power button, does the CPU fan twitch? If the CPU is dead the fan won't twitch.
Is the PSU led a solid color when powered on or does it blink?
Never, unless you just don't care about the CPU anymore, power up a motherboard without the cpu fan connected. It is a totally counterproductive idea.
If your problem is solved , please click the Accepted Solution button
I am not an HP Employee, I am a volunteer posting here on my own time