cancel
Showing results for 
Search instead for 
Did you mean: 
cadottes
New member
1 0 0 0
Message 1 of 2
262
Flag Post

z420 wont b oot

HP Recommended
z420
Microsoft Windows 10 (64-bit)

I did all updates per hp website, now all i get are 6 beeps and nothing

1 REPLY 1
Brian1965
Level 7
537 515 73 128
Message 2 of 2
Flag Post
HP Recommended

Six beeps is indicating an issue with the graphics card.

1.  Ensure the graphics card is plugged into slot 2 (2nd closest slot to the CPU).

2.  Try removing and re-seating the graphics card.

3.  Confirm that the auxilliary power connector(s) is/are plugged into the graphics card if required.

NOTE: If the graphics card is 75W or less, there won't be any auxilliary power connectors on the card.

 

Does the front LED (power button) flash, and if yes, what colour does it flash, red or blue?

What graphics card do you have installed?

HP Z620 - Liquid Cooled E5-1680v2 @4.7GHz / 64GB Hynix PC3-14900R 1866MHz / GTX1080Ti FE 11GB / Quadro P2000 5GB / Samsung 256GB PCIe M.2 256GB AHCI / Passmark 9.0 Rating = 7147 / CPU 17461 / 2D 1019 / 3D 14464 / Mem 3153 / Disk 15451 / Single Threaded 2551
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation