07-14-2016 12:47 PM
Where is the memory card slot on the Pavilion 550-126? The slot on the front does not look like the right size. Is there a way to get a diagram of the front and rear functions?
07-14-2016 01:13 PM
Very interesting. The following link shows its specs:
- Secure Digital™ (SD)
- Secure Digital High Capacity (SDHC)
- Memory Stick
- Memory Stick Select
- Memory Stick PRO
- Memory Stick MagicGate
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
07-18-2016 08:39 AM
I am referring to a standard SD card used in a camera. When I try to insert it into the slot on the front of the 550-126, it only goes about halfway in and even then it does not seem to be a secure snap-in position. This is not my normal experience with the use of SD cards.
07-24-2016 09:23 PM - edited 07-24-2016 09:27 PM
Any possibility that I can get an answer to this question?
I am referring to a standard SD card used in a camera. When I try to insert a standard SD card used in a camera into the slot on the front of the 550-126, it only goes about halfway in and even then it does not seem to be a secure snap-in position. This is not my normal experience with the use of SD cards. Unfortunately,the computer did not recognize nor read the card.
Should the slot perform in this fashion, meaning accept only half of the card and not snap it in?
07-25-2016 01:39 PM
It depends on the reader a lot of them the card goes in half way on some it may go in fully. From my experience I have only used readers that take the card in half way. Your problem might be missing drivers for the reader. Go to HP's download section of drivers for your model. Then go to where it says driver storage download the realtek usb card reader driver.
07-25-2016 02:14 PM
I agree that the SD card only slides in half-way. You should with Device Manager for any error flags. Also check in Control Panel for the Auto Play setting for Memory card.
Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..
Loaner: Envy Omen Windows 10 Pro 64 bit 4th Gen Intel(R) Core(TM) i7-7700HQ + NVIDIA GeForce GTX 1070M 8GB Discrete Graphics (16GB RAM) 512GB m.2 SSD
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro, 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 8GB, 500GB HD SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and OCZ 750W.
Printer -- HP OfficeJet Pro 8620
09-04-2016 09:15 PM - edited 09-04-2016 09:16 PM
This photo shows an SD inserted in the slot on the front of my wife's 550-156 the way it was when the computer had a major breakdown. Is this the way it should look when it is ready to be read?