02-21-2020 05:51 PM
Description: 8200 Elite SFF, 8 GB RAM, x64 Win 10 Pro version 1909, 250GB HDD, BIOS 02.33, EFI, MBD NIC, MBD VGA, no add-in adapter cards.
Actions: Bare metal (clean install). Turned off all options available on install path. All other options default. Appeared to be normal install in all aspects. Installed OS only; no other apps. Boot and logon normal. Ran and passed (sfc, chkdsk /scan, and dism /restore health) with no errors.
Symptoms: Win 10 update cycle takes 30 to 45 minutes. Comes back with the following:
"There were some problems installing updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x8024401c)."
Other: OSI layer 3 checks OK; layers 4 - 7 fails or is flaky
Anyone care to comment?
02-21-2020 07:44 PM - edited 02-21-2020 08:12 PM
Welcome to the forum.
I am not a HP employee.
I can only suggest trying the Windows Update Troubleshooter (Link).
You have a clean install and ran OS and disk integrity checks.
I don't know why a clean W10 install can't update??
Never had this problem with clean W10 installations on older PCs that shipped with W7 or W8.x.
Try this BIOS update (Link) at your own risk. This link is based on the product number (XL510AV) supplied in your post.
02-21-2020 08:31 PM
Thanks for the assist.
Troubleshooter indicated certain changes had been made but no joy.
Am investigating the BIOS suggested. Will most likely try. If do so, will report back on this thread. Do you know if reversal is possible?