846R0AA#ABL... I am looking for information on the chipset and maximum voltage range

[JRCloud9]

Good day, I have a  846R0AA#ABL... I am looking for information on the chipset it has and maximum voltage range in regards to overclocking. Please and thank you.

[Irfan_06]

Hi @JRCloud9,

Welcome to the HP Support Community.

Thank you for posting your query. I will be glad to help you.

I see that you are looking for information related to overclocking your PC.

A) Follow the below steps to access the BIOS menu for information related to the hardware on your PC and it configuration.

1) Hold the power button for at least five seconds to turn off the computer. (Wait for a few seconds after releasing the power button)

2) Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu is displayed, press the f10 to access the BIOS menu.

B) Kindly refer to this link on how to overclock your PC and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day.

Irwin6

HP Support

[JRCloud9]

Thank you for the generic response, but that did not answer the question at all. I know HOW to over-clock my machine. I am asking for the maximum recommended voltage for my chip-set, so I do not push it. I find no information at all on recommended operating ranges for Speed or voltage.

[Irfan_06]

Hi @JRCloud9,

I am sorry to hear that the above steps did not help much but i do appreciate your efforts in performing the troubleshooting steps.

The support on the HP community is currently available within certain constraints. We are striving to enhance our assistance and broaden its scope. We appreciate your understanding and patience.

I've sent you a private message with the instructions. In order to access your private messages, Click the Private message icon on the upper right corner of your HP Community profile Next to your profile Name, you should see a little blue envelope, please click on it or simply click on this link

Take care and have a great day ahead!

Irwin6

HP Support