Adding Extra SSD and HDD to my desktop TP01-3000i

[MH123]

1.I have a Desktop TP01-3175nd that came with 1TB SSD. I will like to add a second SSD and also HDD. Is there a guide as to how to get the PC open and add these?

2. Which SSD type and version will fit? 

3. Which HDD or can I also add a HDD and if so which type SAT, SATA II or SATA III?

Help is most appreciated. 

Thanks , Michael 

[Prométhée · Accepted solution]

hi

you will have to open and check
it is possible that all the sata data or power cables are not present..
probably at least a 3.5 hdd slot
this motherboard only has one type M2 SSD slot

you already have some information here, and documents

https://support.hp.com/in-en/document/c08322023

HP ENVY TE01-3254 with Reno HP motherboard - where on the MB...

diagram of port locations HP Envy 

SATA port on TP01-3008ns? 

here series 000 but it must be quite close

 https://www.youtube.com/watch?v=t8mEay_LVbc&themeRefresh=1

recent computer so sata 3

[MH123]

 can you please advise how many HDD I can install?

[Prométhée]

here i just see a free sata data slot...

[MH123]

Thank you for your help. Information is very useful. 

I have another question though. I also noticed that the pc came without optical drive. Can you please advise where I can get an optical drive DVD writer or anything like that that  fits in the pc? Unfortunately my pc has a snowwhite colour but I guess a silver optical drive will do. I only need to know the type and size and where such drive is available.

Thanks for your help once again.

I have another question though. I alwaynotices th ce

[Prométhée]

Would you mind opening another thread, for this question
so as not to mix everything up
In any case, it may be easier to use an external DVD player, but I have never tested
and I rarely advise on untested material..

thanks

best wishes, happy new year @MH123 

[MH123]

Sorry 😊. 

Best wishes to you too.