cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
talDias
New member
1 0 0 0
Message 1 of 2
639
Flag Post

Solved!

Adding a second m.2 drive on GT13-0990nz

HP Recommended
HP Omen GT13-0990nz
Microsoft Windows 10 (64-bit)

Hi,

I have just ordered this computer and it comes with 1TB NVMe SSD drive. I would ideally like to use the second NVMe slot to expand this with a WD BLack 2TB NVMe, is this  possible? I've read here and there that these slots come pre-configured to be in Raid0.

 

Thanks in advance for your time.

1 ACCEPTED SOLUTION

Accepted Solutions
old_geekster
Level 16
Level 16
25,325 18,951 2,930 9,355
Message 2 of 2
Flag Post
HP Recommended

@talDias , welcome to the Community.

 

You made a great choice of computers.

 

Here is what it says about the M.2 sockets: Two M.2 socket 3, key M (for SSD card PCIe x4 Gen 3).  There is no mention of RAID0.  So, I believe what you want to do should be possible.

 

Here is the Product Specifications page: https://support.hp.com/th-en/document/c06990686

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
old_geekster
Level 16
Level 16
25,325 18,951 2,930 9,355
Message 2 of 2
Flag Post
HP Recommended

@talDias , welcome to the Community.

 

You made a great choice of computers.

 

Here is what it says about the M.2 sockets: Two M.2 socket 3, key M (for SSD card PCIe x4 Gen 3).  There is no mention of RAID0.  So, I believe what you want to do should be possible.

 

Here is the Product Specifications page: https://support.hp.com/th-en/document/c06990686

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation