-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- DVD drive missing on Windows 10

Create an account on the HP Community to personalize your profile and ask a question
04-26-2016 12:08 PM
I had previously upgraded my COMPAQ 500B Desktop from Windows 7 Pro to Windows 10 (Free, from Microsoft) and have enjoyed it very much. I sometimes watch DVD movies on the computer. Recently, the DVD drive (HP DVD drive, model TS-H653) disappeared from my list of available drives. I first thought the drive had died, and replaced it with a new SATA DVD drive. (I kept the original drive) Needless to say, the new drive is not seen either. I checked all my cable connections with no change. I researched H-P's driver download page with no luck. Any suggestions?
Solved! Go to Solution.
Accepted Solutions
04-26-2016 01:34 PM
NEVER MIND. The problem has been resolved. It was a two-fold problem.
The original drive went bad, and the SATA3 port on the mother board stopped working.
I originally plugged in a new DVD drive with no change in symptoms (it appeared dead).
I reasoned that this was a new DVD drive, so I plugged it into another SATA port on my mother board, and the computer recognized it immediately.
So, I placed the original DVD drive back in the computer, packaged up the replacement DVD drive, buttoned up my computer and got back to work, only to find the computer no longer recognized the DVD drive again.
I knew I had just seen it working, so I had to shut down the computer and replace the original DVD drive (AGAIN). This time; I left the case open until I confirmed that the new drive worked, and the original SATA3 port on the motherboard was actually dead.
End result is a bad DVD drive, and a bad SATA3 port on the motherboard.
Thank you for reading my flustering activities.
04-26-2016 01:34 PM
NEVER MIND. The problem has been resolved. It was a two-fold problem.
The original drive went bad, and the SATA3 port on the mother board stopped working.
I originally plugged in a new DVD drive with no change in symptoms (it appeared dead).
I reasoned that this was a new DVD drive, so I plugged it into another SATA port on my mother board, and the computer recognized it immediately.
So, I placed the original DVD drive back in the computer, packaged up the replacement DVD drive, buttoned up my computer and got back to work, only to find the computer no longer recognized the DVD drive again.
I knew I had just seen it working, so I had to shut down the computer and replace the original DVD drive (AGAIN). This time; I left the case open until I confirmed that the new drive worked, and the original SATA3 port on the motherboard was actually dead.
End result is a bad DVD drive, and a bad SATA3 port on the motherboard.
Thank you for reading my flustering activities.