cancel
Showing results for 
Search instead for 
Did you mean: 
dpcfbs
New member
2 1 0 0
Message 1 of 3
563
Flag Post

Solved!

Does the HP ProDesk 600 G3 SFF support Hyper-V / can SLAT be enabled?

HP Recommended
ProDesk 600 G3 SFF
Microsoft Windows 10 (64-bit)

As above really. Looking to run two VMs on the above machine:

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
SimonaStick
Level 3
22 20 5 5
Message 2 of 3
Flag Post
HP Recommended

The short answer is yes........but

I know for a fact the HP ProDesk 600 G3 with i5 or i7 processor will indeed support virtual environment Second Level Address Translation  as I am doing just that myself. You must enable those in the system BIOS as it is not enabled by default.

Processors i3 and below I am not sure about at the BIOS level as I have never tested them.

 

Hope this helps

 

 

 

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
SimonaStick
Level 3
22 20 5 5
Message 2 of 3
Flag Post
HP Recommended

The short answer is yes........but

I know for a fact the HP ProDesk 600 G3 with i5 or i7 processor will indeed support virtual environment Second Level Address Translation  as I am doing just that myself. You must enable those in the system BIOS as it is not enabled by default.

Processors i3 and below I am not sure about at the BIOS level as I have never tested them.

 

Hope this helps

 

 

 

View solution in original post

Was this reply helpful? Yes No
dpcfbs
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

That's exactly what I needed to know.

 

Thanks!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation