04-11-2017 04:08 PM
That Belarc Advisor looks good, thanks. I found a heatsink that looks perfect today
A little bit of dremeling and it should be fine.
I have an ssd in the msata slot and was looking at the mini pcie next to it and found a mini two port sata 3.0 card with a raid controller that looks cool. It is too tight to fit under the drive caddy but could be used with an extension cable.
The one bottom left is only £11 on ebay.
10-18-2017 08:00 AM - edited 10-18-2017 10:21 PM
Do you think it will work with the HP 8770w paoer adpater. I have attached a picture of the back which shows the wattage and such. I was seeing that you were using a 230W. I have a HP 800 G1 USDT.
02-14-2019 12:16 PM
If the plug is the correct size and has the center pin (assuming the original does), it should work fine. I know the 230 watt version works with the 800 G1 USDT despite the 135 and 180 watt being the only versions it shipped with.